Wall formwork

This 90° Inner Corner is equipped with a releasing aid to shutter rectangular inner corners. The 90° angle can be decreased by 2° simply by unlatching the corner stiffener. Refer to page 179 of the user manual for further information.

For single-sided wall formwork up to a maximum height of 3.25 m.

In the case of "lying" frame formwork, the support frames are to be arranged directly behind the formwork in the area of the tie openings. It is fastened with the bolt clamps and clamping nuts. The anchor exit must be observed!

Weight: 177.48 kg

Manto concreting platform

Attention! Small repairs and cleaning must be carried out.

A complete 1.20m wide stage with decking and side protection in the system length of 2.40m. After setting up the folding railing, the concreting platform can be hung onto the MANTO formwork using a crane. The platform is secured against lifting by an automatic...

The Platinum aligning clamp joins in one operation the Platinum 100 panels with a neat, tight and aligned fit in horizontally and vertically arranged panel combinations.

Lattice box incl.

The package consists of 50 Platinum aligning wedge clamps.

The Platinum aligning wedge clamp joins in one operation the PLATINUM 100 panels with a neat, tight alignet fit in horizontally and vertically arranged panel combinations.

The package consists of 1 platform beam.

The platform beam is made of steel. It is not adjustable and is made to suit the application. Main beam of a shaft platform, equipped with flexible supports that automatically click into place during lifting operations.

Weight: 52.2 kg