Produkte von Hünnebeck

Technical data
- 14cm aluminum frame profile
- Corrosion protection by powder coating
- Formwork sheet ECOPLY® plastic formwork sheet
- Shuttering times t= 0.2 - 0.4 h/m²

Work productively
- Only two components required: panel and prop
- Fast shutering with the large panel 180x180cm with 3,24 m² forming area

Work...

Technical data
- 14cm aluminum frame profile
- Corrosion protection by powder coating
- Formwork sheet ECOPLY® plastic formwork sheet
- Shuttering times t= 0.2 - 0.4 h/m²

Work productively
- Only two components required: panel and prop
- Fast shutering with the large panel 180x180cm with 3,24 m² forming area

Work...

Technical data
- 14cm aluminum frame profile
- Corrosion protection by powder coating
- Formwork sheet ECOPLY® plastic formwork sheet
- Shuttering times t= 0.2 - 0.4 h/m²

Work productively
- Only two components required: panel and prop
- Fast shutering with the large panel 180x180cm with 3,24 m² forming area

Work...

This 90° Inner Corner is equipped with a releasing aid to shutter rectangular inner corners. The 90° angle can be decreased by 2° simply by unlatching the corner stiffener. Refer to page 179 of the user manual for further information.

15 tripod stands incl. 1 lattice box

Tripod stand makes it easier to set up the supports

The tripod stand may only be used as an installation aid. It does not replace the necessary measures for dissipating the H loads from the formwork, wind, concreting process, etc. into the structure of the building.

Tripod stand Weight per one: 11,83 kg

Package consisting of 1x 60 pieces of joist clamping connector incl. 1 lattice box and 1x 60 adjustable fixing beam 500 incl. 1 lattice box

Joist clamping connector: The galvanized Joist clamping connector enables the forming of beams with H 20 carrier or R24​​carrier. It is simply clamped onto the top chord of the carrier without a grid. Maximum ceiling load...

Fork head 8/20 – for edge and middle yokes

Incl. 1 lattice box

Safety of H 20 beams arranged on the support head plate when using a central bend

Maximum load capacity: 24.00 kN

Depending on the pipe diameter of the steelror support, a T-bolt is required, the bolt is used for failover.

Weight: 2.96 kg

30 x railing holder S incl. 1 stacking frame

Technical features:

Hot-dip galvanized, stable spindle, impact permissible 150kg, distance 2m, ceiling thickness up to 40cm, handrail secured against tipping, no wedging - solid spindle

Weight: 11.3 kg

Manto concreting platform

Attention! Small repairs and cleaning must be carried out.

A complete 1.20m wide stage with decking and side protection in the system length of 2.40m. After setting up the folding railing, the concreting platform can be hung onto the MANTO formwork using a crane. The platform is secured against lifting by an automatic...

The Protecto railing post is the basic component of the Protecto edge protection system. It is used to carry plank railings or the Protecto mesh panel. An intregrated safety device secures the post automatically to the various retaining elements

The Platinum aligning clamp joins in one operation the Platinum 100 panels with a neat, tight and aligned fit in horizontally and vertically arranged panel combinations.

1x stacking frame incl.

The package consists of 50 Prop 15-300

Low dead weight 11kg

Long-term value preservation thanks to high-quality production and galvanizing

Crushing and fail-safe

Second hand