Formwork accessories

15 tripod stands incl. 1 lattice box

Tripod stand makes it easier to set up the supports

The tripod stand may only be used as an installation aid. It does not replace the necessary measures for dissipating the H loads from the formwork, wind, concreting process, etc. into the structure of the building.

Tripod stand Weight per one: 11,83 kg

Fork head 8/20 – for edge and middle yokes

Incl. 1 lattice box

Safety of H 20 beams arranged on the support head plate when using a central bend

Maximum load capacity: 24.00 kN

Depending on the pipe diameter of the steelror support, a T-bolt is required, the bolt is used for failover.

Weight: 2.96 kg

1 x Lattice Box incl.

The package consists of 200 bracing clamps.
Attaches stiffening shutterboards to any tubular steel props.

incl. Lattice box

For the connection of additional frames to ID15 towers with a leg distance of 27 cm. The connection allows the arrangement of ID frames in tight adjustment areas or to support particularly high or concentrated loads.

The package consists of 10 column walers.

For production of right-angled formwork halves with various dimensions for column formwork.

1 x lattice box incl.

The package consists of 40 HT table heads.
Steel props are mounted to the table by using the HT table heads. All connecting parts are integrated. A plastic cap arrests the locking steel wedges during transportation without steel props. In this way, damage to the plywood sheet is avoided when stacking the floor tables.